From bdddb2197df2cb91df2e414a0af32455ffe713e1 Mon Sep 17 00:00:00 2001 From: AnInternetTroll Date: Sat, 21 May 2022 11:46:16 +0200 Subject: Add bspwm and configure sway a bit more --- .config/bspwm/bspwmrc | 45 ++++++ .config/polybar/colors.ini | 44 +++++ .config/polybar/config.ini | 391 +++++++++++++++++++++++++++++++++++++++++++++ .config/polybar/launch.sh | 12 ++ .config/sway/config | 21 ++- .config/sxhkd/sxhkdrc | 158 ++++++++++++++++++ .config/waybar/config | 5 +- 7 files changed, 665 insertions(+), 11 deletions(-) create mode 100755 .config/bspwm/bspwmrc create mode 100644 .config/polybar/colors.ini create mode 100644 .config/polybar/config.ini create mode 100755 .config/polybar/launch.sh create mode 100644 .config/sxhkd/sxhkdrc diff --git a/.config/bspwm/bspwmrc b/.config/bspwm/bspwmrc new file mode 100755 index 0000000..891ca0d --- /dev/null +++ b/.config/bspwm/bspwmrc @@ -0,0 +1,45 @@ +#!/usr/bin/env sh +# vi: ft=sh + +export SXHKD_SHELL=sh +pgrep -x sxhkd > /dev/null || sxhkd & +$HOME/.config/polybar/launch.sh & +feh --auto-reload --bg-fill /usr/share/backgrounds/background.png & +xrandr --output HDMI1 --auto --same-as eDP1 --mode 1920x1080 & + +dunst & +/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 & +nm-applet & +blueman-applet & +thunar --daemon & +#pipewire & +#pipewire-pulse & + +# Set up touchpad controls + +# Libinput +TID=$(xinput | sed -n 's/.*Touchpad.*id=\([0-9]*\).*/\1/p') +#xinput --set-prop $TID 'libinput Accel Speed' 0.5 +xinput --set-prop $TID 'libinput Tapping Enabled' 1 & +xinput --set-prop $TID 'libinput Natural Scrolling Enabled' 1 & + +# Synapse +#TID=`xinput list | grep "SynPS/2 Synaptics TouchPad" | sed 's/.*id=\([0-9]*\).*/\1/g'` +#PROP_NO=`xinput list-props ${TID} | grep "Synaptics Scrolling Distance" | sed 's/.*(\([0-9]*\)).*/\1/g'` +#xinput --set-prop $TID 'Synaptics Tap Action' 1 +#xinput set-prop ${TID} ${PROP_NO} -106 -106 + +#bspc monitor -d I II III IV V VI VII VIII IX X +bspc monitor -d 1 2 3 4 5 6 7 8 9 10 + +bspc config border_width 2 +bspc config window_gap 12 + +bspc config split_ratio 0.52 +bspc config borderless_monocle true +bspc config gapless_monocle true + +bspc rule -a mplayer2 state=floating +bspc rule -a Kupfer.py focus=on +bspc rule -a Screenkey manage=off + diff --git a/.config/polybar/colors.ini b/.config/polybar/colors.ini new file mode 100644 index 0000000..e4cd65d --- /dev/null +++ b/.config/polybar/colors.ini @@ -0,0 +1,44 @@ +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ +;; +;; ______ __ +;; / ____/___ / /___ __________ +;; / / / __ \/ / __ \/ ___/ ___/ +;; / /___/ /_/ / / /_/ / / (__ ) +;; \____/\____/_/\____/_/ /____/ +;; +;; Created By Aditya Shakya @adi1090x +;; +;; Modiified by Aufa Rijal @aufarijaal +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[color] + +;; Dark +bg-alt = #5C6F7B +ac = #4DD0E1 + +trans = #00000000 +white = #FFFFFF +black = #000000 + +;; Colors + + +bg = #282a36 +fg = #f8f8f3 +indigo = #6272a4 +grey = #43475a +pink = #ff78c6 +orange = #ffb86c +green = #50fa7b +cyan = #8ae9fd +purple = #bd93f8 +red = #ff5455 +yellow = #f1fa8c +blue = #42A5F5 +teal = #00B19F +lime = #B9C244 +amber = #FBC02D +brown = #AC8476 +blue-gray = #6D8895 + diff --git a/.config/polybar/config.ini b/.config/polybar/config.ini new file mode 100644 index 0000000..aea9251 --- /dev/null +++ b/.config/polybar/config.ini @@ -0,0 +1,391 @@ +;========================================================== +; +; +; ██████╗ ██████╗ ██╗ ██╗ ██╗██████╗ █████╗ ██████╗ +; ██╔══██╗██╔═══██╗██║ ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗ +; ██████╔╝██║ ██║██║ ╚████╔╝ ██████╔╝███████║██████╔╝ +; ██╔═══╝ ██║ ██║██║ ╚██╔╝ ██╔══██╗██╔══██║██╔══██╗ +; ██║ ╚██████╔╝███████╗██║ ██████╔╝██║ ██║██║ ██║ +; ╚═╝ ╚═════╝ ╚══════╝╚═╝ ╚═════╝ ╚═╝ ╚═╝╚═╝ ╚═╝ +; +; +; To learn more about how to configure Polybar +; go to https://github.com/polybar/polybar +; +; The README contains a lot of information +; +;========================================================== + +[colors] +background = #282a36 +background-alt = #44475a +foreground = #f8f8f2 +primary = #bd93f9 +secondary = #8be9fd +alert = #ff5555 +disabled = #6272a4 + +[bar/mybar] +width = 100% +height = 30pt +radius = 6 + +dpi = 80 + +background = ${colors.background} +foreground = ${colors.foreground} + +line-size = 3pt + +border-size = 4pt +border-color = #00000000 + +padding-left = 0 +padding-right = 1 + +module-margin = 1 + +separator = | +separator-foreground = ${colors.disabled} + +font-0 = monospace;2 + +modules-left = xworkspaces +modules-center = xwindow +modules-right = backlight pulseaudio battery xkeyboard memory cpu temperature wlan eth date + +cursor-click = pointer +cursor-scroll = ns-resize + +enable-ipc = true + +tray-position = right + +; wm-restack = generic +wm-restack = bspwm +; wm-restack = i3 + +; override-redirect = true + +[module/xworkspaces] +type = internal/xworkspaces + +label-active = %name% +label-active-background = ${colors.background-alt} +label-active-underline= ${colors.primary} +label-active-padding = 1 + +label-occupied = %name% +label-occupied-padding = 1 + +label-urgent = %name% +label-urgent-background = ${colors.alert} +label-urgent-padding = 1 + +label-empty = %name% +label-empty-foreground = ${colors.disabled} +label-empty-padding = 1 + +[module/xwindow] +type = internal/xwindow +label = %title:0:60:...% + +[module/filesystem] +type = internal/fs +interval = 25 + +mount-0 = / +mount-1 = /opt + +label-mounted = %{F#bd93f9}%mountpoint%%{F-} %percentage_used%% + +label-unmounted = %mountpoint% not mounted +label-unmounted-foreground = ${colors.disabled} + +[module/pulseaudio] +type = internal/pulseaudio + +format-volume-prefix = "VOL " +format-volume-prefix-foreground = ${colors.primary} +format-volume = + +label-volume = %percentage%% + +label-muted = muted +label-muted-foreground = ${colors.disabled} + +[module/xkeyboard] +type = internal/xkeyboard +blacklist-0 = num lock + +label-layout = %layout% +label-layout-foreground = ${colors.primary} + +label-indicator-padding = 2 +label-indicator-margin = 1 +label-indicator-foreground = ${colors.background} +label-indicator-background = ${colors.secondary} + +[module/memory] +type = internal/memory +interval = 2 +format-prefix = "RAM " +format-prefix-foreground = ${colors.primary} +label = %percentage_used:2%% + +[module/cpu] +type = internal/cpu +interval = 2 +format-prefix = "CPU " +format-prefix-foreground = ${colors.primary} +label = %percentage:2%% + +[network-base] +type = internal/network +interval = 5 +format-connected = +format-disconnected = +#label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected + +[module/wlan] +inherit = network-base +interface-type = wireless +#label-connected = %{F#F0C674}%ifname%%{F-} %essid% %local_ip% +label-connected = %{F#bd93f9}%essid%%{F-} %local_ip% +label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected + +[module/eth] +inherit = network-base +interface-type = wired +label-connected = %{F#F0C674}%ifname%%{F-} %local_ip% + +[module/date] +type = internal/date +interval = 1 + +date = %H:%M:%S +date-alt = %Y-%m-%d + +label = %date% +label-foreground = ${colors.primary} + +[module/backlight] +type = internal/xbacklight + +format = +label = %percentage%% + +; Only applies if is used +ramp-0 = 🌕 +ramp-1 = 🌔 +ramp-2 = 🌓 +ramp-3 = 🌒 +ramp-4 = 🌑 + +; Only applies if is used +bar-width = 10 +bar-indicator = | +bar-fill = ─ +bar-empty = ─ + +; XRandR output to get get values from +; Default: the monitor defined for the running bar +; output = HDMI-1 + +; Create scroll handlers used to set the backlight value +enable-scroll = true + +[module/battery] +type = internal/battery + +; This is useful in case the battery never reports 100% charge +; Default: 100 +full-at = 99 + +; format-low once this charge percentage is reached +; Default: 10 +; New in version 3.6.0 +low-at = 5 + +; Use the following command to list batteries and adapters: +; $ ls -1 /sys/class/power_supply/ +battery = BAT0 +adapter = ADP1 + +; If an inotify event haven't been reported in this many +; seconds, manually poll for new values. +; +; Needed as a fallback for systems that don't report events +; on sysfs/procfs. +; +; Disable polling by setting the interval to 0. +; +; Default: 5 +poll-interval = 5 + +; see "man date" for details on how to format the time string +; NOTE: if you want to use syntax tags here you need to use %%{...} +; Default: %H:%M:%S +time-format = %H:%M + +; Available tags: +; (default) +; +; +; +format-charging = + +; Available tags: +; (default) +; +; +; +format-discharging = + +; Available tags: +; (default) +; +; +;format-full = + +; Format used when battery level drops to low-at +; If not defined, format-discharging is used instead. +; Available tags: +; +; +; +; +; New in version 3.6.0 +;format-low = + +; Available tokens: +; %percentage% (default) - is set to 100 if full-at is reached +; %percentage_raw% +; %time% +; %consumption% (shows current charge rate in watts) +label-charging = Charging %percentage%% + +; Available tokens: +; %percentage% (default) - is set to 100 if full-at is reached +; %percentage_raw% +; %time% +; %consumption% (shows current discharge rate in watts) +label-discharging = Discharging %percentage%% + +; Available tokens: +; %percentage% (default) - is set to 100 if full-at is reached +; %percentage_raw% +label-full = Fully charged + +; Available tokens: +; %percentage% (default) - is set to 100 if full-at is reached +; %percentage_raw% +; %time% +; %consumption% (shows current discharge rate in watts) +; New in version 3.6.0 +label-low = BATTERY LOW + +; Only applies if is used +ramp-capacity-0 =  +ramp-capacity-1 =  +ramp-capacity-2 =  +ramp-capacity-3 =  +ramp-capacity-4 =  + +; Only applies if is used +bar-capacity-width = 10 + +; Only applies if is used +animation-charging-0 =  +animation-charging-1 =  +animation-charging-2 =  +animation-charging-3 =  +animation-charging-4 =  +; Framerate in milliseconds +animation-charging-framerate = 750 + +; Only applies if is used +animation-discharging-0 =  +animation-discharging-1 =  +animation-discharging-2 =  +animation-discharging-3 =  +animation-discharging-4 =  +; Framerate in milliseconds +animation-discharging-framerate = 500 + +; Only applies if is used +; New in version 3.6.0 +animation-low-0 = ! +animation-low-1 = +animation-low-framerate = 200 + +[module/temperature] +type = internal/temperature + +; Seconds to sleep between updates +; Default: 1 +interval = 0.5 + +; Thermal zone to use +; To list all the zone types, run +; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done +; Default: 0 +thermal-zone = 0 + +; Full path of temperature sysfs path +; Use `sensors` to find preferred temperature source, then run +; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done +; to find path to desired file +; Default reverts to thermal zone setting +;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input + +; Base temperature for where to start the ramp (in degrees celsius) +; Default: 0 +base-temperature = 20 + +; Threshold temperature to display warning label (in degrees celsius) +; Default: 80 +warn-temperature = 60 + +; Whether or not to show units next to the temperature tokens (°C, °F) +; Default: true +units = true + +; Available tags: +;